
Add to Cart
Heat Shrink Repair Sleeve Manufactured From Polyolefin Inner Coated With Glue
Manufactured from polyolefin, inner coated with hot-melt adhesive
Providing fast and permanent repair and sealing protection for power cables
High tensile strength, abrasion and corrosion resistance
A corrosion proof metal channel is used to close the sleeve during installation
Shrink temperature: start at 90P, and fully recovered at 130
Selection Table
Product No. | Inner Diameter/mm | After Recovered Wall Thickness (±0.2) /mm | Standard Length /mm | |
As Supplied (Min) | After Recovered (Max) | |||
WRSXP-30/12 | 30 | 12 | 3.8 | 450-1000 |
WRSXP-40/14 | 40 | 14 | 3.8 | 450-1000 |
WRSXP-50/17 | 50 | 17 | 3.8 | 450-1000 |
WRSXP-60/23 | 60 | 23 | 3.8 | 450-1000 |
WRSXP-65/23 | 65 | 23 | 3.8 | 450-1000 |
WRSXP-80/35 | 80 | 35 | 3.8 | 450-1000 |
WRSXP-85/35 | 85 | 35 | 3.8 | 450-1000 |
WRSXP-100/35 | 100 | 35 | 3.8 | 450-1000 |
WRSXP-120/40 | 120 | 40 | 3.8 | 450-1000 |
WRSXP-150/50 | 150 | 50 | 4.0 | 450-1000 |
WRSXP-160/50 | 160 | 50 | 4.0 | 450-1000 |
WRSXP-195/70* | 195 | 70 | 2.0 | 450-1000 |
WRSXP-240/90* | 240 | 90 | 2.0 | 400-600 |
WRSXP-290/115* | 290 | 115 | 2.0 | 400-600 |