Changzhou Longchuang Insulating Material Co., Ltd.
Manufacturer of good insulation materials； Your long-term partner !
Add to Cart
5/32 4mm Black 4X Adhesive-Lined Cross-Linked Polyolefin Tubing
Adhesive lined heat shrink specifically designed to insulate, seal and protect inline splices in automotive wire harnesses and electronic assemblies.
Features
4:1 shrink ratio allows for fewer sizes to cover numerous splice configurations and diameters.
Seals and protects against water, moisture and chemicals
Adhesive bonds readily to PVC, XLPE and PP-EPDM
cable jackets
Shrinks rapidly for quick installation
Continuous operating temperature:-45°C-125°C
Initial shrinkage temperature:70°C
Fully shrink Temperature:^110°C
Dimensions
| Size | Expanded | After Recovery | ||||
| Internal | Internal | Total Wall | Adhesive | Standard Package | ||
| Inch | mm | Diameter | Diameter | Thickness | Thickness | |
| Min(mm) | Max(mm) | Nom(mm) | Nom(mm) | |||
| 5/32 | 4 | 4.0 | 0.95 | 1.40±0.30 | 0.60±0.20 | 1.22OR25M/Roll |
| 1/4 | 6 | 6.0 | 1.27 | 1.70±0.30 | 0.80±0.20 | 1.22OR25M/Roll |
| 5/16 | 8 | 8.0 | 1.65 | 2.00±0.30 | 0.95±0.20 | 1.22OR25M/R0II |
| 2/5 | 10 | 10.0 | 2.00 | 2.20±0.40 | 1.10±0.20 | 1.22 OR25M/Roll |
| 1/2 | 12 | 12.0 | 2.41 | 2.45±0.40 | 1.20±0.20 | 1.22OR25M/Roll |
| 3/4 | 18 | 18.0 | 4.45 | 2.60±0.40 | 1.34±0.30 | 1.22OR25M/Roll |
Technical Data
| I Property | Test Method | Standard | Typical Performance I |
| Tensile Strength(MPa) | ASTM D2671 | ^10.4 | 11.5 |
| Elongation(%) | ASTM D2671 | N300 | 450 |
| Tensile Strength after aging (MPa) | UL224 158°CX168hr | N7.3 | 8.5 |
| Elongation after aging(%) | UL224 158°CX168hr | N200 | 350 |
| Dieletric strength(kV/mm) | IEC 60243 | M15 | 17.5 |
| Volume resistivity(Q.cm) | IEC 60093 | >1X1014 | 2.5X1014 |
Adhesive
| Property | Test Method | Standard I |
| Water Absorption | ASTM D570 | <0.2% |
| Sofening Point(°C) | ASTM E28 | 90±5 |
| Strength of pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D 1000 | 80N/25mm |
